Voltage references in embedded design
Embedded systems that are dealing with DAC require good voltage references. Despite all voltage references having their nominal values, specific tolerances indicate how much values can vary from the nominal value. References, as a rule, are semiconductors that characteristics are affected by temperature. For instance, if we decide to use a 2.5V voltage reference then (Zener) diode LM336A-2.5 may be a good choice for this. These diodes have a low-temperature coefficient. It can guarantee that voltage will be in the range between 2.44 and 2.54 at 25ºC. This precise Zener diode has a third lead that can be used to adjust break down voltage. In the following figure, you may see a diode with a potentiometer where breakdown voltage can be adjusted in the range of ±120mV: