Probably you saw the Sun tracking system before; however, do you have the urge to challenge yourself to make a Sun Tracking Unit? First of all, get a tiny .7″x1.4″ PC board using the LED3X sensor concept. This circuit uses power MOSFET drivers, which most any DC motor can be used without any modification. You might notice that the power drivers are good enough for delivering about 50 amps of peak current or even more. The current will increase accordingly to the transistor. This means the large power MOSFET, 72A, when operated in low power mode, will eliminate the transistor’s need for a heat sink. Cool, isn’t it?