ELECTRONICS PROBLEMS

Home Forums Electronics ELECTRONICS PROBLEMS

This topic contains 0 replies, has 1 voice, and was last updated by  robinsenny 2 weeks, 2 days ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #9332

    robinsenny
    Participant

    Hi,

    I have a Felix 3.0 dual extruder printer that I assembled myself from the kit. One extruder is working fine; the other doesn’t heat. For the one that is working, the measured resistance is very low, and the one that is not working is very high. Which seems to make sense. The question is, what do I do now?Also, the display powers on but just gives me a blue screen. Any suggestions would be gratefully received.The printer works just fine with the single extruder while connected to a computer, though.

    Please help.

    I didn’t find the right solution from the Internet.

    References:-
    https://www.felixprinters.com/forum/viewtopic.php?t=998

    Custom explainer video

    Thanks!

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Comments are closed.