Behold – Here is The World's Most Powerful Magnet!

Can you ever imagine, how heavy of the world’s most powerful magnet can be? Well, believe it or not, this electromagnet is weighing almost 18,000 pounds and it’s fully powered by jolts from a massive 1,200-megajoules motor generator. Once it has been activated, the new magnet would be about two million times more powerful than the average refrigerator magnet! Basically, the electromagnet can be divided into two main parts. The outer part is the cylinder with 1.5 meters in diameter and 1.5 meters tall. It’s very solid except for a small hole, which is less than 8 inches wide that bored through the middle of magnet. The nine coils, which is made of copper and have been strengthened with silver wire lay inside the hole. As a result, the copper and silver will create the strongest and powerful material known of all! According to the researchers, the pressures that being generated inside the insert part can be equivalent to 200 sticks of dynamite going off together. In other hands, it’s about 30 times the pressure at the bottom of the ocean as well! The inner and outer magnets can create up to 90 teslas in one time, which Teslas is…

Continue reading

New 6D Holograms Will Shock You Off!

Are you still living in the world, where everything seems to be perfect in the 3 Dimensional? Well, then you must be a very outdated person, as the technology is more advancing than you’re thought here! Ladies and gentlemen, welcome to the world of “6D Holograms” and this is far beyond your imagination! Technically, these 6D holograms is a small, 7 x 7 pixels display, and it will respond to changes in light and the viewer’s direction as well! Since it’s still in the early development phase, the researchers expected that in the next two to three years, they could be scaled it up and create some of the most fascinating images! Ramesh Raskar, one of the scientists and researchers at MIT who helped in the development of this project, said that they are the first researcher group that able to build a display that changes with lighting and in the most realistic display.

Continue reading

Your Tongue Will Have A New Job!

We’re normally using our tongue to speak, taste, swallow the foods and fighting the harmful germs. This is what we know and what we should be known about it… Do you think that our tongue will be capable to do other things, instead of the actions that we’re doing each day? What is your response, if you’re been telling that now you can use your tongue to control the computer? Yep, it’s not a joke, as a group of researchers from the Georgia Tech has been developed a magnetic, tongue-powered system. This system could transform every organ into the computer parts, which as: Your mouth will turn into a virtual computer, Your teeth into a typing keyboard, and Your tongue into the key that can be manipulated all features!

Continue reading

The New Breakthrough of The Invisibility Cloaks!

If you’re one of the Harry Potter fans, you’ll know that the Harry has an invisible cloak, which it will make the body disappear, once the person put on it. Believe it or not, a group of researcher from the University of California at Berkeley and the Lawrence Berkeley National Laboratory have been created a material that can bend visible light in three dimensions and the sizes is in the Nanoscale, which it can be measured in billionths of meter! Although this is really a shocking and advanced breakthrough in the metamaterials field, however it still has two severe limitations. Firstly, it will only work on the microwave range of the light spectrum and secondly, it will only work on thin, two-dimensional systems!

Continue reading

The Creative VUW Students Develop Innovative 3D Printers

Are you already bored with your plain and ordinary printer, and would like to have some changes on it? Well, then you must hang out and discover how the creative VUW students managed to develop the innovative 3D printers, which it’s bring more excitement and spice up your life. The genius senior Victoria University of Wellington Design students have successfully created the 3D printers in just three weeks! The main goal for this design is to develop a “green” 3D printer in less than 4 weeks with only limited budget. A group of creative students practicing the “3R” concept and had applied it into the new 3D printers design. Below here are some of the unique and eco-friendly 3D printer’s prototypes: Stack The students have cleverly used the waste paper from generated by a bank and a ‘steampunk’ sewing machine. They used the smart concept to create layered forms, which based on an interpretation of the banks statistical data. This design is simply the finest combination of the past and present (Brilliant idea!).

Continue reading

Is Time to Witness the Formation of Early Universe with the phenomenon Nano-Sized Electronic Circuit

The development of science and technology grows in leaps and boundaries phase, especially in this 21st century, when everything seems to change in rapid speed. Many of the scientists and astronomers have discovered that the universe was formed 14 billion years ago, while our mother planet, The Earth just a measly 4.55 billion years old. For this purpose, a newly and high-tech nano-sized electronic device has been developed, which it can be used to see the 98% invisible light dating that emitted since the first universe “bing bang”. This diminutive nano-sized electronic device is the fine project cooperation in between the physicsts at Rutgers University, the State University of New York at Buffalo and the NASA’s Jet Propulsion Laboratory in Pasadena, California. It is an ultra sensitive to track the light in the far-infrared spectrum (the longest wave in the infrared wavelengths) and the size of this device is 100 times smaller than the thickness of your hair!

Continue reading